Last seen: Sep 2, 2023
@maw, that looks like a terrific installation. Thanks for sharing the picture, and I hope that truly resolves your issues for the long term. Congrat...
@dan Yes, once I had another throttle and wasn't worried about the original one, I took it apart and removed the set screw in the collar. Then I got ...
@maw I don't know the temperature that the Zapi controller will tolerate, but I do know that mine gets pretty hot during extended operation. Interest...
@maw Okay, from your picture, by "drive unit" you mean the controller enclosure. So, does the cover have the two fans, and if so, I'm assuming the fa...
@theboatofus Wow, that does look old. Did Duffy offer you any alternative for replacing the actuator? Or are they suggesting that you need to replac...
Hi, Vince ----- Can you give me the manufacturer/model number of the converter? Thanks!
@russnpeggy My motor gets pretty hot on a 2 or 3-hour cruise ----very hot to the touch. I've been told by my Duffy dealer that it's nothing to worry ...
Unfortunately, I never was able to find the PM capability either. I'd mask your email address as best you can when posting. Congrats on the sale/pu...
Welcome to the Forum! Do you know the original motor manufacturer or model number? I'd also contact the Duffy factory to see if they can give you t...
@74duffy Welcome to the forum!That is one old Duffy. Have you contacted the Duffy factory to see if they can help you with an electrical schematic? ...
That is a beautiful Duffy! Nice restoration job. Enjoy the ride!
Oh, boy------I had something similar happen several years ago. It sounds like the steering tube has slipped in the bracket that is screwed into the t...
@maw Mark, I don't believe there is an archive, or at least I've never found one. Depending on your particular boat, there may be a fuse between the ...
I've got the electrical schematic for a 2010 Duffy M160, which I've attached here. You didn't mention your model, but I know my boat is not the same ...
@mr-wocohose Okay, so for me, the big clue is that when you use one of the 12V accessories, it kills power to the motor.Do you 12V accessories run off...